Introducing Tire and Wheel Tools.  Whether your at your local motocross track, off-road event, garage, shop or just out riding having the right tools for the right job makes your riding experience a whole lot better.  Changing tires can be a challenge and having specialized tools sure helps the job go much easier and faster.  Tire changing tools such as Motion Pro's spoon type tire irons help minimize pinched tubes and scratched rims.  The Motion Pro Bead Buddy hands free tool holds the bead down in the drop center part of the rim helping make tire removal much easier.  The valve core removal tool is hex designed to allow a wrench or socket fit to remove those tight value cores. Additional Motion Pro tools available soon.
 

Tire Changing Tools

Pit Posse Motorcycle Tire Changing Stand
Part # PP2753   BUY $109.95

Pit Posse Tire Changing Stand

Pit Posse
Tire Changing Stand


click here to enlarge
 

• Works great at the shop or track

• Stand is adjustable from 28-36" high

• Assembles/disassembles quickly

• Tire Rim stabilizer is rubber coated to prevent scratches

• Will work on 10-21" rims.

• Adapter for smaller rims included

• BUY $109.95

Tire and Wheel Changing Tools

Outlaw Racing Products Air Valve Stem Puller
Part # PP1690-R   BUY $9.95

Air Valve Stem Puller

CLICK HERE TO ENLARGE

The Outlaw Racing Products Air Valve Puller was designed to save time and your fingers! When changing a tire or repairing a flat just put the end of the Air Valve Puller thru the hole in the rim, thread it into the valve stem, then, just pull the valve stem thru the hole! The Air Valve Puller can also be used to remove or tighten your valve core as well.

• Aluminum Handle

• Steel Cable

• Brass Air Valve Stem Connector

• Handle approximately 2-3/4" Wide

• Cable approximately 8" Length

• Fits securely in the hand

• Easily inserts valve stem through rim

• Recommended by top tire changers

• BUY $9.95

Motion Pro Tire Changing Tools

Motion Pro Spoon Type Tire Iron 10"
Part # PC0081115   BUY $13.99

Motion Pro Spoon Type Tire Iron 10"

CLICK HERE TO ENLARGE
 

• Curved end fits securely in the hand

• Hard nickel pewter finish

• 10" long and weighs 4.2 oz.

• Recommended by top tire changers

• BUY $13.99

Pit Posse 11inch Tire Spoon with Handle

Pit Posse 11inch Tire Spoon With Handle
Part # PP275   BUY $14.95

click here to enlarge

Description: Pit Posse 11inch Tire Spoon With Handle

Pit Posse Tire Spoon with Handle is made from quality drop forged and tempered steel built to last. Ergonomic handle fits your hand making your tire changing tast no problem.

BUY $14.95

Motion Pro Tire Changing Tools

Motion Pro 16" Steel Tire Iron
Part # PC005019   BUY $15.50

Motion Pro Steel Tire Tool 16" 08-0007

CLICK HERE TO ENLARGE

• Cold forged steel

• 16 inch long double-compound-curved tire iron

• Sold individually

• BUY $15.50

Pit posse Tire Changing Tools

Pit posse Ultimate Tire Iron 16"
Part # PP2063   BUY $22.95

Pit Posse Ultimate Tire Iron 16"

CLICK HERE TO ENLARGE
 

• Overall Length 16"

• Easy Grip Aluminum Handle

• Spoon Type End

• Made of Steel

• Recommended by top tire changers

• BUY $22.95

  Motion Pro Bead Buddy II

Motion Pro Bead Buddy II
Part #MP080471                                                    BUY $14.99

Motion Pro Bead Buddy II

CLICK HERE TO ENLARGE

CLICK HERE TO ENLARGE

• New and improved design of the original Bead Buddy

• Durable 6061 aluminum construction with blue anodized finish and laser engraved logo

• A must for installing Bib Mousse tubes

• Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires

• Hooks over spoke and pushes bead down on opposite side of tire from tire irons

• No more fighting to keep bead down while installing off-road tires

• Patent pending

• BUY $14.99

Motion Pro RimShield™
Part # MP080481                                 BUY $11.50

Motion Pro RimShield™

CLICK HERE TO ENLARGE

CLICK HERE TO ENLARGE

- Prevents rim damage from tire levers during tire changes
- Dual raised beads facilitate inserting tire lever under tire bead and prevents tire lever from slipping
- Durable nylon construction won't mar wheels
- Handholds make it easy to insert and remove
- Long apron protects hands and spokes
- Patented design
- Sold in set of 2
BUY $11.50

The new patented Motion Pro RimShield™ will make you want to throw your old rim protectors away. The RimShield™ provides excellent protection to the rim of the wheel and features a large flat area that extends towards the hub of the wheel to protect the spokes and inner part of the wheel, also providing a working platform for your tire irons. It features raised ridges on either side of the tool which hold the bead of the tire up, making it much easier to insert tire irons under the lip of the tire. The extension part of the RimShield™ also has two finger holes to make repositioning fast and easy and allows the RimShield™ to be easily removed at the end of the installation process.

Made from a durable plastic composite with just the right amount of flex, the RimShield™ is the perfect tool for changing tires on that special wheel that just can’t have any scratches and also makes changing any tire a lot easier. Sold in pairs, the RimShield™ is available through all major powersport distributors. Get a couple of sets for your service shop and stock a few in the parts department for your customers too!

Motion Pro Nylon Rim Saver
Part # MP008357                                Buy Now $9.99

Motion Pro Nylon Rim Savers

CLICK HERE TO ENLARGE

CLICK HERE TO ENLARGE

• Designed to protect alloy rims from getting scratched by tire irons or tools while changing tires

• Made from tough nylon

• Must be trimmed for ATV use

• Sold as a pair

• Buy Now $9.99

Motion Pro Valve Core Remover

Motion Pro Valve Core Remover
Part # PC0088183   BUY $2.99

Motion Pro Valve Core Remover

CLICK HERE TO ENLARGE

• Made from hex stock

• Allows for easy removal and installation of standard valve cores in tubed or tubeless value stems (Schrader valve)

• Perfect tool pack accessory

• BUY $2.99

Motion Pro Bead Popper

Motion Pro Bead Popper
Part # MP080439   BUY $19.50

Motion Pro Bead Popper

CLICK HERE TO ENLARGE

• Designed for breaking the bead on street and off-road motorcycle tires

• Great for the shop, trail or on the road

• Easier and more convenient than press or lever tools

• Can be used with the wheel on or off the motorcycle

• Works great on tire changing stands

• Will not scratch the wheel

• Made of durable high-impact plastic

• Compact and lightweight (only 3.7 oz) stores easily in your emergency tool pack or tool box

• Not for use on ATV tires

• Made in the U.S.A.

• BUY $19.50

Tire Pressure Gauges

Motion Pro Professional Tire Gauge
Part # MP080258   BUY $94.50

Motion Pro Professional Tire Gauge 0 - 31 PSI

CLICK HERE TO ENLARGE

• 2.5" Liquid filled gauge with multi-colored face and heavy duty protective boot

• Constructed from 6061 aluminum with integrated push button bleeder valve for easy tire pressure adjustments without removing gauge from valve stem

• 18" premium hose with dual swivels and brass push on ball check

• 0-31 PSI

• BUY $94.50

Tire Pressure Gauges

Motion Pro Accu-Gauge Hose Series Tire Gauge
Part # AG002004   BUY $21.99

Accu-Gage Series Tire Gauge 30 PSI with 90 Degree Head

60 PSI Version Displayed
CLICK HERE TO ENLARGE

• Rugged, bronze bourdon tube and precision-made full-geared brass movement

• Friction-free construction provides greater accuracy than piston plunger gauges

• 90 degree head with bleeder

• 30 PSI

• Includes Accu-Gauge Tire Gauge Protector

• BUY $21.99

Pit Posse
Motorcycle Tire Mounting Lubricant
 

Pit Posse
Motorcycle Tire Mounting Lubricant

Product Code: PP3180 BUY $9.95

Description: Pit Posse Tire Changing Lube

Pit Posse tire mounting lubricant makes your job of mounting/dismounting tires easier.
 

- Lubricates all rubber parts-stops rubber squeaks

- Approved by major rubber companies
- Can be used at full strength or diluted up to 4 to 1 with water. When mixing with water, mix thoroughly until lubricant mixture is completely blended.

Available in quart size, quart includes convent squirt top.

Pit Posse
K & L Tire Tamer

Pit Posse
K & L Tire Tamer

Product Code:  BUY $22.95
PP359264

Description: K & L Tire Tamer

Revolutionary new tool holds the bead away from rim for easy valve steam, rim rock and tube installation.

This tool is the helper you need when changing tires! Simple to use design lifts the tire bead away from the rim in one easy motion, with one hand.

Makes installing tubes, valve stems and rim locks a snap, even when working alone. Small enough to carry on the trail.  Save your knuckles, time and temper!

 FEATURED PRODUCTS

Motocross Tools

Tire and Wheel Tools

Pit Posse
Tire Changing Stand
INFO

The Pit Posse tire changing stand works great in the shop or at the track. Adapter for small rims is included.

Other Great Products! 

MX Tools

Exhaust Tools

Exhaust Spring Puller Tool
Hook and shaft one piece for superior strength

INFO

Mikes Racing Products Tire Changing Stands

Customer Service

More questions about DirtWerkz products? We're here to help. info@dirtwerkz.com

Warranty and Return information please review the DirtWerkz  "ABOUT-US" web page.

Back to Top