|
 SPEED
BLEEDER
Brake Bleeders
Bleeding brakes doesn't have to be so
hard...
|
Introducing Speed
Bleeder... The motorcycle bleeder screw with the built-in check
valve that makes bleeding your brakes truly a one person job!
Simply remove your OEM bleeder screw and replace it with Speed
Bleeder. When you are ready to bleed your brakes loosen the Speed
Bleeder 1/4 turn. Pump the brake lever or pedal until bubble free
fluid is seen. Close the speed Bleeder and you are done. Anyone can
do it! Speed Bleeders are priced at $.00 each for the OEM steel
version and $12.00 each for the Stainless Steel version. |
The new and improved way
SPEED BLEEDER, the patented bleeder screw with the built-in check
valve. It is truly a one-person bleeder screw. Once installed, it
becomes a permanent part of the brake system. When it is time to bleed
your brakes, you loosen the Speed Bleeder 1/4 turn and pump your brake
pedal. When the pedal is depressed the pressure generated opens the
check valve letting air and brake fluid out of the end of the Speed
Bleeder. When you release the pedal and it returns to the up position,
the check valve closes and prevents any air from reentering the system
through the Speed Bleeder. When bubble free fluid is evident you close
the Speed Bleeder. In the closed position it works just like your stock
bleeder screw and prevents any brake fluid from leaking out. It
generally takes about 5 pumps to purge each caliper or wheel cylinder.
That is all there is to bleeding your brakes. If at a later date you
need to bleed your brakes, the patented thread sealing system makes it
easy to open the bleeder screw to perform the bleeding operation. It is
made of quality materials and it is economical.
Features of SPEED BLEEDER
-
Stainless steel spring
-
Stainless steel ball
-
Brass retainer
-
The threads are roll
formed. This process results in a stronger and smoother thread than
one that is cut.
-
The chamber for the ball
and spring is precision reamed and the seat for the stainless steel
ball is machined to exacting tolerances.
-
Zinc chromate plating
withstands a 30 hour salt spray. Other plating with higher salt spray
results is also available.
-
Patented thread sealing
system seals the threads when the bleeding operation is performed,
preventing air from being sucked back into the system.
-
The pre-applied thread
sealant also displaces air and moisture during thread engagement
preventing rust...which usually results in rounded off corners on the
hex or busted off bleeder screws making it necessary to replace the
caliper or brake cylinder. The application of thread sealant thus
makes it easy to loosen or remove the bleeder screw at any time.
Fits:
-
Honda
-
Yamaha
-
Suzuki
-
Kawasaki
SPEED BLEEDER® and
Accessories
|
Prices do not include
S&H and applicable tax
Please allow 3-10 business days for most deliveries
|
|
Speed Bleeder
Stainless Steel
SB8125L-SS, Stainless Steel
Thread Size: M8 X 1.25, Length 32.54mm
SBP-SB8125L-SS:
BUY
NOW $12.00 EA.
Speed Bleeder
OEM type Steel
SB8125L, OEM Style Steel
Thread Size: M8 X 1.25, Length 32.54mm
SBP-SB8125L:
BUY NOW $7.00 EA.
Fits:
2000-2005 Honda & Yamaha
80-450cc Motocross Bikes
Please verify thread size with your local
dealer prior to ordering!
Plus S&H and applicable tax |
|
Speed Bleeder
Stainless Steel
SBP-SB7100S-SS, Stainless Steel
Thread Size: M7 X
1.0, Length 30.22mm
SBP-SB7100S-SS: BUY
NOW $12.00 EA
Speed Bleeder
OEM type Steel
SBP-SB7100S, OEM Style Steel
Thread Size: M7 X
1.0, Length 30.22mm
SBP-SB7100S:
BUY NOW $7.00 EA.
Fits:
2000-2005 Kawasaki
80-450cc Motocross Bikes
Please verify thread size with your local
dealer prior to ordering!
Plus S&H and applicable tax |
Speed Bleeder
Stainless Steel
SBP-SB7100-SS,
Stainless Steel
Thread Size: M7 X 1.0, Length 35.15mm
SBP-SB7100-SS: BUY
NOW $12.00 EA.
Speed Bleeder
OEM type Steel
SBP-SB7100, OEM Style Steel
Thread Size: M7 X 1.0,
Length 35.15mm
SBP-SB7100:
BUY NOW $7.00 EA.
Fits:
2000-2005 Suzuki
80-450cc Motocross Bikes
Please verify thread size with your local
dealer prior to ordering!
Plus S&H and applicable tax |
